Sika Sikabond 5500s Parquet and Wood Floor Adhesive | Solvent Based Rigid Adhesive for Wood Block and Engineered Wood Flooring - 16kg

Product Information

Must be clean, dry, contaminant free and thoroughly cleaned with industrial vacuum cleaner.Anhydrite screed / Anhydrite flowable screed:

concrete/cement screed: must be clean, dry, contaminat free and thoroughly cleaned with industrial vacuum cleaner; Anhydrite screed / Anhydrite flowable screed: Must be ground and thoroughly cleaned with industrial vacuum cleaner and Primed with Sika Primer MB or SikaBond 5500 S diluted 1 - 1 with Thinner EG. underfloor heating: after through preparation and commissioning of the heating system, the entire floor area must be primed using a mixture of 1 part SikaBond 5500S to 1 part Sika Thinner EG (by volume). Roller apply and allow to cure;The substrate must be clean and dry, homogeneous, even, free from grease, dust and loose particles. Paint, cement laitance and other poorly adhering particles must be removed. Standard construction rules must be observed. To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options. All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control. to 1.2 kg per meter square depending upon size of notched trowel used and subfloor surface profile. Floor may be walked on sanded & finished approximately 48 hours after installation depending on climatic conditions,

anhydrite screed/anhydrdite flowable screed: must be ground and thoroughly cleaned with industrial vacuum cleaner and primed with Sika Primer MB or SikaBond 5500S diluted 1:1 with thinner EG; To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1. Clean all tools and application equipment with Sika Remover 208 or Thinner EG immediately after use. Hardened / cured material can only be mechanically removed.

Solseal Delivery Schedule

The product and its vapours are highly inflammable, ensure adequate air ventilation during application and curing.